Osram PrevaLED Core Z2 Manual de usuario descargar pdf (Pagina 25)

7. Norms and standards

NORMS AND STANDARDS

7.1. Norms and standards for PrevaLED

LED modules and light engines

PrevaLED

Core Z2 complies with the following standards:

Zhaga-speciﬁ cation book 3: Spotlight systems with separate

electronic control gear

According to the EC declarations (European directive: 2006/95/EC, European

directive: 2004/108/EC), PrevaLED

Core Z2 complies with the following norms:

Safety of LED modules: IEC 62031

Photobiological safety: IEC/TR 62471-2 (typenabhängig)

Electromagnetic compatibility: DIN EN 55015

DIN EN 61547

DIN EN 61000-3-2

DIN EN 61000-3-3

Ingress protection: IP 20

Vibration, shocks, tensile strength: IEC 60068-2-6

IEC 60068-2-27

IEC 60068-2-21

7.2. Norms and standards for control gears

Safety: IEC 61347-1, IEC 61347-2-13

Performance: IEC 62384

Radio interference: EN 55015 (A1:2007, A2:2009)

Harmonic content: IEC 61000-3-3:2008

Immunity: IEC 61547:2009

Temperature range: See corresponding value within the datasheet

Galvanic insulation between

primary and secondary side: 3 kV

rms

No-load proof: Yes

Short circuit proof: Yes

Overload protection: Automatic shutoff, reversible

Overheating protection: Automatic shutoff, reversible

Connection, primary: For OTp 15 HD: screw-terminals

For OTp 35 HD and OTp 45 HD: push-in terminals

Cross section, primary: 0.5 mm

–1.5 mm

Connection, secondary: 5-pin connector, for use with cable kit

Cross section, secondary: Only for use with special cable kit

Dimensions (L x W x H): 123 x 79 x 33 mm for all OTp 35 and all OTp 45

109 x 50 x 35 mm for OTp 15 HD

Approvals:

0 i

]

For test and certiﬁ cation measurements,

a mains voltage of 230 is recommended.

1 2 ... 20 21 22 23 24 25 26 27

Comentarios a estos manuales

Sin comentarios

Osram PrevaLED Core Z2 Manual de usuario Pagina 25

Comentarios a estos manuales

Relacionado con productos y manuales para Encendiendo Osram PrevaLED Core Z2