Osram EASY DMX 16x4 SO Manual de usuario descargar pdf (Pagina 28)

XII 2009

EASY DMX SO

Description

Behaviour after a power failure

In the event of a power failure, the EASY DMX behaves as follows:

• Lighting control mode: The last status prior to a power failure is automatically

restored.

• Sequencer mode: The sequence restarts with the rst active scene.

• Daylight simulation: The simulation restarts with the rst active scene.

Construction

The control unit is made up of the following components:

• EASY signal input

• One 4-pin push-in contact (A) for connecting EASY devices with open wires, e.g.

EASY PB COUPLER:

1: Supply voltage

2: Sync signal

3: Infrared signal

4: Signal ground

• Two modular 4p4c plug-in contacts (B) for connecting EASY devices that provide

a built-in 4p4c plug, e.g. EASY IR

• DIP switch (C) for activating termination resistor

• DMX signal output

• RJ45 connector (D):

Pin 1: DMX –

Pin 2: DMX +

Pin 3: DMX shield

Pins 4-8: N.C.

1 8

• 3-pin push-in contact (E)

• Mains connection (F): L, N,

• DIP switches (G) for activating test mode (DIP switch 1) and master status (DIP

switch 2)

• External switch input (H) for connecting light switches

• LEDs (J)

• EASY signal input (K): modular 4p4c plug-in contact (programming interface) for the

EASY PC KIT

• Housing (L)

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 113 114

Sin comentarios

Osram EASY DMX 16x4 SO Manual de usuario Pagina 28