Osram QUICKTRONIC INTELLIGENT DIM CFL Manual de usuario descargar pdf (Pagina 10)

special lines or cable penetrations. A 5 x 1.5 mm

NYM cable, for

example, can be used for the mains feed and DALI.

1…10 V DALI

Potential-free control input Potential-free control input

Two-wire line (with +/- polarity) Two-wire line (polarity-free)

Dimming curve, luminous flux linear Dimming curve, optically linear

(= logarithmic), matching the sensitivity of

the eye

Non-addressable

• Wiring acc. to groups required

Addressing possible:

• Individual (max. 64 addresses)

• In groups (max. 16)

• All together

! No wiring acc. to groups

Not possible Scene memory (max. 16)

Not possible

Individual addressing of the DALI ECG

Not possible Status messages of the DALI controllers

• Lamp faults

• Operating life

• Dimmer setting

Not possible Individual dimming options

• Storing the last dimming value as a start-

ing value

External mains voltage switch

(e.g.: relay)

Integrated mains voltage switch (switch-

off of the ECG via DALI interface, no relay

necessary)

Common mains supply and control line

possible through:

Basic insulation

Common mains supply and control line

possible through mains:

TouchDIM interface

• Control with mains voltage

without obser-

vation of the mains voltage phase

! No separate bus line

• Conventional, commercially available

buttons

Table 1: Comparison between 1...10 V and DALI

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 91 92

Comentarios a estos manuales

Sin comentarios

Osram QUICKTRONIC INTELLIGENT DIM CFL Manual de usuario Pagina 10

Comentarios a estos manuales